Where to start
| Your job | Start with | Then |
|---|---|---|
| Building a new straight stair | Total rise, then the stair calculator | Stairwell opening, stringers, materials |
| A stair that has to turn or fit a small space | Staircase footprint | The L, U, winder or spiral calculator it points to |
| A loft or attic | Ship ladder or attic ladder | Spiral staircase, if the loft is a habitable room |
| Deck or porch steps | Stair calculator in deck mode | Stringers, stringer span, railings |
| Rails, balusters, cable or glass | Stair handrail or baluster spacing | Cable or glass railing |
| Refinishing an existing stair | Staircase cost | Carpet, flooring or paint |
| Checking a stair before inspection | Stair code checker | Stair span, or egress width for commercial stairs |
How the calculators work
- Every result shows its working. Each page has a “Solved with your numbers” section with the formula filled in, so you can check the arithmetic yourself.
- Drawings to scale. Most calculators draw the stair, rail or part as you type; on many you can drag a handle on the drawing to change an input.
- Code limits named. Where a limit applies, the result says which rule and which code section it used, and what to change if the stair fails.
- Tested before release. Each calculator is run against worked cases computed from the published limits and formulas; the worked examples on each page are among them.
- Nothing to sign up for. The calculations run in your browser, and there is no account to create.
Codes and units
The calculators that check rules let you choose the US IRC for homes (the default), the US IBC for commercial buildings, UK Approved Document K, the Canadian code or the Australian NCC; some also offer “none” for geometry only. Lengths can be entered and shown in inches, feet and inches, millimetres, centimetres or metres, and you can type fractions such as 7 1/4 or values with units such as 184mm. Your unit choice is remembered across the site. The cost calculator uses US national prices, each with its date, and lets you enter your own.
Stair calculator FAQs
Which stair calculator should I start with?
For a new stair, the total rise calculator and then the stair calculator — every other result depends on the risers and treads they give you. To redo an existing stair, start with the materials and cost calculators; to check one, the stair code checker.
Are the calculators free?
Yes. Every calculator is free to use with no sign-up, no limit on the number of uses and nothing to download. Results can be copied, printed or shared as a link.
Can I save or share a result?
Each calculation updates the page address with your inputs, so you can bookmark it or send the link and it opens with the same numbers. You can also copy the result as text, print it or download the drawing.
Do the calculators replace a building inspector or an engineer?
No. They give you accurate numbers and check them against the model codes, which is what a permit drawing and a conversation with the inspector need. The building department’s reading of the local code is final, and structural or commercial work may need a stamped design.
Do the calculators work on a phone?
Yes. Every calculator works on phones and tablets: the inputs stack in one column, the drawings resize to the screen, and a short result bar lets you jump back to the answer as you scroll.
Sources
- International Residential Code 2021, Chapter 3, Section R311.7 — Stairways (opens in a new tab)International Code Council. Riser, tread, nosing, width and handrail limits for homes; flight height limit at R311.7.3.
- International Building Code 2021, Chapter 10, Section 1011 — Stairways (opens in a new tab)International Code Council. Riser, tread and flight limits for commercial buildings.
- Approved Document K: Protection from falling, collision and impact (opens in a new tab)UK Government (statutory guidance for England). Maximum riser, maximum pitch and 2R + G range.
- National Building Code of Canada 2020 (opens in a new tab)National Research Council Canada. Riser and run limits for stairs.
- National Construction Code 2019, Volume Two, Part 3.9.1 — Stair construction (opens in a new tab)Australian Building Codes Board. Riser and going limits and 2R + G range (Table 3.9.1.1), no more than 18 and no fewer than 2 risers in each flight.
Code text is the final word. Editions and local amendments differ — check the edition your building department enforces.