Staircase Cost Calculator

Price a new or replacement staircase by material, shape, railing, removal and permit — or a remodel item by item: recarpet, refinish, new treads, painted risers, handrail and spindles. You get a low, mid and high total, each line item, and the cost per step. Every default rate shows its source and date, and you can enter your own local rates.

By the Stair-Math TeamUpdated How we check this calculator

What are you pricing?

Your stair

steps

ft

Along the rail, in feet. Measure it with the stair handrail calculator.

Remove the old staircase

Adds $300–$2,000.

Building permit

Adds $100–$500.

Quick picks:

Units

Your cost range

Low to high cost range of each line item
Each line item as a low-to-high bar, with the total range and its midpoint.

Cost notes

    Solved with your numbers

      Assumptions: installed costs (materials and labour) at US national averages, current to the source dates shown; no changes to the framing or stairwell; railing length entered separately; sales tax and engineering not included.

      Every default rate is a published US national figure, shown with its date beside the line it prices; the shape factors are worked out from published starting costs by style. The totals are tested against 7 worked cases, new stairs and remodels. See the method · Sources

      How the staircase cost calculator works

      New staircase. With n steps, a per-step rate for the material and a shape factor:

      stair = n × per-step rate × shape factor · railing = length × rate per foot

      total = stair + railing + removal + permit, worked out once with the low rates and once with the high rates

      mid = (low + high) ÷ 2 · per step = total ÷ n

      Stair remodel. With n risers of height R, n − 1 treads of depth T, nosing N and width W (areas in ft² = in² ÷ 144):

      carpet area = n × (R + T + N) × W · carpet = n × install rate + area × carpet price · removal = area × (removal + disposal)

      refinish = (n − 1) × (T + N) × W (+ n × R × W with risers) × rate · treads = (n − 1) × tread price

      paint risers = n × R × W × rate · handrail = feet × rate · balusters = feet of railing × rate

      Each line is rounded to whole dollars for a new stair and to cents for a remodel, and the totals are the sums of the lines. Enter your own low and high rates under Your local rates and they replace the defaults line by line.

      Default rates and their dates

      US national installed costs used as defaults
      ItemLow–highSource date
      Interior hardwood stair$100–$300 per step2026
      Deck stair (wood or composite)$172.50–$315 per step2023
      Poured concrete stepsabout $600 per stepOct 2024
      Precast concrete stepsabout $200 per stepOct 2024
      Handrail$30–$45 per ft2025
      Guard railing$40–$60 per ft2023
      Remove old staircase$300–$2,0002025
      Permit$100–$5002025
      Carpet installation$14–$36 per step2026
      Carpet (polyester / nylon / wool)$1–$3 / $2–$5 / $4–$20 per ft²2026
      Carpet removal and disposal$1.40–$5.50 per ft²2026
      Refinish (sand and restain)$4.50–$8 per ft²2025
      Hardwood treads$100–$200 per tread2025
      Paint risers$2–$6 per ft²2025
      Balusters or spindles$25–$47 per ft of railing2025

      Metal and glass stairs have no reliable per-step figure — they are custom work, so enter a quoted rate. Outside the US, enter local rates for every line.

      Worked examples

      Replace a 14-step hardwood stair

      1. Stair14 × $100–$300 × 1 (straight) = $1,400–$4,200.
      2. Handrail15 ft × $30–$45 = $450–$675.
      3. Removal and permit$300–$2,000 and $100–$500.
      4. Total$2,250–$7,375, mid $4,813 — $161–$527 per step, inside the published $2,000–$10,000 replacement range.

      8-step deck stair

      8 × $172.50–$315 = $1,380–$2,520, plus 20 ft of guard railing at $40–$60 ($800–$1,200) and a permit: $2,280–$4,220, mid $3,250 — $285–$528 per step.

      Refinish with a new rail and spindles

      13 treads of 11¼ in by 36 in are 36.56 ft²: refinishing at $4.50–$8 is $164.53–$292.50. Painting 25.38 ft² of risers adds $50.75–$152.25, a 15 ft handrail $450–$675 and 15 ft of spindles $375–$705: $1,040.28–$1,824.75, mid $1,432.52.

      L-shaped, spiral and curved stairs

      A turn means a landing or winders, more framing and more railing, so shaped stairs cost a multiple of a straight one. The factors here are the published starting cost of each style divided by the straight-stair starting cost of $2,000:

      Shape factors from published starting costs by style
      ShapeStarting costFactor14 hardwood steps
      Straight$2,000×1$1,400–$4,200
      L-shaped or U-shaped$4,000×2$2,800–$8,400
      Spiral$8,000×4$5,600–$16,800
      Floating$10,000×5$7,000–$21,000
      Curved$12,000×6$8,400–$25,200

      Spiral, floating and curved stairs are specialist work and the factor can understate a custom design. Plan the layout first with the L-shaped stair calculator or the spiral staircase calculator.

      Remodel costs: carpet, refinish or new treads

      • Recarpet: the cheapest refresh — about $326–$828 for 14 steps in nylon, plus removal of the old carpet.
      • Refinish: worth it when the treads are solid hardwood; sanding and restaining 13 treads costs about $165–$293.
      • New treads: when treads are softwood under carpet or badly worn — about $1,300–$2,600 for 13 hardwood treads. New treads on top raise every step, so check the bottom and top risers with the stair flooring calculator.
      • Handrail and spindles: often the biggest line in a remodel, at $30–$45 per foot of handrail and $25–$47 per foot of spindles.

      Doing the work yourself? Count the materials with the stair carpet calculator, the stair paint calculator or the stair materials calculator.

      Checking a contractor’s quote

      National ranges are a starting point — local labour can sit well outside them. Get three quotes. If one is far above the high value here, ask for it itemised: materials, labour, railing, removal and disposal, and permit. A quote far below the low value may leave out the railing, the permit or finishing.

      What this calculator does not cover

      • Structural changes to the floor framing or the stairwell opening, and engineering where needed (about $300–$800).
      • Sales tax (about 5–10%) and painting the stairwell walls.
      • Material quantities: use the concrete steps calculator and the other stair materials calculators.
      • Code checks: use the stair code checker.

      Staircase cost FAQs

      How much does it cost to build stairs?

      A straight 14-step interior hardwood staircase runs about $1,400–$4,200 for the stair itself at US national rates. With 15 ft of handrail, removal of the old stair and a permit the total comes to about $2,250–$7,375 — mid about $4,800.

      What is the cost per step for new stairs?

      About $100–$300 per step for an interior hardwood stair, $172.50–$315 for a deck stair, about $600 for poured concrete and about $200 for precast concrete steps. With railing, removal and permit added, a straight 14-step stair works out at about $161–$527 per step.

      How much does it cost to replace a staircase?

      Published replacement ranges run from about $2,000 to $10,000 for a typical straight stair. Removal of the old stair adds about $300–$2,000 and a permit about $100–$500. Shaped, open or custom stairs cost more.

      How much does an L-shaped or spiral staircase cost?

      Published starting costs by style put an L-shaped or U-shaped stair at about twice a straight one, a spiral at about four times, a floating stair at five times and a curved stair at six times. A 15-step L-shaped hardwood stair comes to about $3,000–$9,000 before railing. Spiral, floating and curved stairs are specialist work — get quotes.

      How much does it cost to carpet stairs?

      Installation runs about $14–$36 per step plus the carpet: polyester about $1–$3, nylon $2–$5 and wool $4–$20 per ft². A 14-step stair 36 in wide takes about 65 ft², so nylon carpet installed costs about $326–$828, plus about $91–$356 to remove and dispose of the old carpet.

      How much does it cost to refinish stairs?

      Sanding and restaining runs about $4.50–$8 per ft². The 13 treads of a 36 in wide stair are about 37 ft², or $165–$293; painting the 14 risers adds about $51–$152. A new handrail and spindles usually cost more than the refinishing.

      How much do deck stairs cost per step?

      About $172.50–$315 per step, from a published 8-step, 48 in wide sample of $1,380–$2,520. A guard railing adds about $40–$60 per foot, so 8 steps with 20 ft of railing and a permit come to about $2,280–$4,220.

      How much does stair railing cost per foot?

      About $30–$45 per foot for a handrail and $40–$60 per foot for a wood or metal guard railing, installed. Replacing balusters or spindles runs about $25–$47 per foot of railing ($250–$470 per 10 ft).

      Do I need a permit to replace stairs?

      Usually yes when you replace or rebuild a stair, because it is structural and must meet the stair rules for rise, run, headroom and guards. Recarpeting, refinishing and painting usually do not need one. Permit fees run about $100–$500 — check with your local building department.

      Sources

      1. Hardwood stairs cost per step (2026)National home-services cost guide: $100–$300 per step installed — the wood rate.
      2. Cost to carpet stairs (2026)National home-services cost guide: installation $14–$36 per step; carpet by fibre per ft²; removal $1–$5 per ft² and disposal $0.40–$0.50 per ft².
      3. Stair replacement and style starting costs (2025)National home-services cost guide: removal $300–$2,000; starting costs by style (straight $2,000, L or U $4,000, spiral $8,000, floating $10,000, curved $12,000) — the source of the shape factors.
      4. Stair repair and refinishing costs (2025)National home-services cost guide: refinishing $4.50–$8 per ft²; handrail $30–$45 per foot; spindles $250–$470 per 10 ft; treads $100–$200 per step.
      5. Deck stair cost (2023)Published deck stair cost guide: 8 steps, 48 in wide, $1,380–$2,520; railing $40–$60 per foot.
      6. Concrete steps cost (October 2024)National home-services cost guide: poured steps about $600 per step; precast about $200 per step.
      7. Permit feesTypical US residential building permit fees for a stair replacement, about $100–$500; local fees vary.

      Code text is the final word. Editions and local amendments differ — check the edition your building department enforces.

      Stair materials & cost calculatorsAll 6 tools for what a stair takes to build or finish — lumber, concrete, carpet, flooring, paint and cost.View all 6

      Other stair calculator categories