Stair Materials Calculator

Enter your rise, tread and width and get a complete shopping list for a wood stair: how many stringers and in what length, tread stock and how many boards per tread, riser boards, skirt boards, screws, adhesive and hangers — with the stock lengths to buy, waste included, and board feet for every item and in total.

By the Stair-Math TeamUpdated How we check this calculator

Your stair

in

Finished floor to finished floor. Not sure? Work out your total rise.

in

The riser count is rounded to fit your rise exactly, as in the stair calculator.

in

in

in

in

16 in is common; 12 in for composite deck treads; 18 in is the usual maximum for cut stringers.

Risers
Quick picks:

Units

Your materials list

Side view of the stair with stringer, treads, risers and skirt, and one tread from above with its stringers and boards
Side view and one tread from above, to scale. Drag the second stringer to change the spacing.

Materials notes

    Solved with your numbers

      Assumptions: a straight stair whose top tread is the upper floor (treads = risers − 1); cut 2x12 stringers; 1x12 skirt boards; hardwood tread blanks sold in 36–72 in lengths and other boards in 8 ft lengths; waste added to the boards you buy, not to the pieces. Board feet use nominal sizes.

      Riser and tread geometry from IRC R311.7, cut-stringer spacing from prescriptive deck rules and dressed sizes from standard US lumber, listed under Sources; the quantities are worked out on this page. Tested against 4 worked cases, including a deck stair with 2x6 treads, 5/4x12 boards that are too narrow and a metric stair. See the method · Sources

      How the stair materials calculator works

      The risers come from the total rise exactly as in the stair calculator: n risers of height R and n − 1 treads of depth T. Then, with nosing N, width W and stringer spacing s:

      stringers = max(2, ceil(W ÷ s) + 1) · stringer length = n × √(R² + T²) → the shortest of 8, 10, 12 … 20 ft that is long enough

      boards per tread = ceil((T + N + gap) ÷ (board width + gap)) · tread pieces = treads × boards per tread

      tread blanks: buy = ceil(pieces × (1 + waste)), blank length the shortest of 36, 42, 48, 60, 72 in that covers W

      boards: pieces per 8 ft board = floor(96 ÷ W) · buy = ceil(pieces ÷ pieces per board × (1 + waste))

      risers: 1x8 if R ≤ 7¼ in, else 1x10 · skirts: stringer length + 12 in

      screws = treads × stringers × 3 + risers × stringers × 2 · adhesive = ceil(treads ÷ 5) · hangers = stringers

      Board feet use nominal sizes — a 2x12 counts as 2 × 12 in — so the total matches how lumberyards price boards.

      Worked examples

      An interior hardwood stair

      1. Inputs108 in rise · 7¼ in target riser · 10½ in treads · 1 in nosing · 36 in wide · 16 in spacing · tread blanks · closed risers · 2 skirts · 10% waste.
      2. Stair15 risers of 7.20 in, 14 treads.
      3. Stringersceil(36 ÷ 16) + 1 = 4; each needs 15 × 12.73 = 190.97 in → 16 ft; 128.0 BF.
      4. Treads10.5 + 1 = 11.5 in — one blank per tread; 14 pieces → buy 16 blanks 36 in long; 48.0 BF.
      5. Risers and skirts15 1x8 risers, two per 8 ft board → 9 boards (48.0 BF); two skirts 202.97 in → 18 ft (36.0 BF).
      6. Hardware and total288 screws, 3 tubes of adhesive, 4 hangers; 260.0 BF.

      A deck stair with 2x6 treads

      A 56 in rise with 11¼ in treads and no nosing has 8 risers of 7 in. At 12 in spacing a 48 in stair needs 5 stringers, each 106 in → 10 ft. Two 2x6 boards with a ¼ in gap cover each tread: 14 pieces, two from each 8 ft board, so 8 boards with waste. Open risers, no skirts: 105 screws and 164.0 BF.

      How much lumber do I need for stairs?

      36 in interior stair, 10½ in treads, 1 in nosing, tread blanks, closed risers, 2 skirts, 16 in spacing, 10% waste
      Floor to floorRisersStringersTread blanks1x8 riser boardsSkirtsTotal
      3 ft (36 in)54 × 8 ft532 × 8 ft111 BF
      4 ft 8 in (56 in)84 × 10 ft852 × 10 ft151 BF
      7 ft (84 in)124 × 14 ft1372 × 14 ft216 BF
      8 ft (96 in)134 × 14 ft1482 × 16 ft239 BF
      9 ft (108 in)154 × 16 ft1692 × 18 ft260 BF
      10 ft (120 in)174 × 18 ft18102 × 20 ft291 BF

      Above about 10 ft of rise the stringers and skirts pass 20 ft — use engineered lumber or add a landing, and check the span.

      Tread boards and nosing

      A tread must cover the run plus the nosing. A hardwood tread blank about 11½ in deep covers a 10½ in run with a 1 in nosing in one piece. Dimensional boards are narrower than their name: 5/4x12 and 2x12 are 11¼ in, so a 10½ in run with a 1¼ in nosing (11¾ in) needs two boards per tread — the calculator warns you. The table under your result compares every stock for your tread.

      Deck stairs usually use two 5½ in boards per tread with a ⅛–¼ in gap for drainage; enter the gap and the calculator fits the boards and counts the pieces.

      How many stringers?

      Stringers are spaced evenly across the width: ceil(width ÷ spacing) + 1. Cut 2x12 stringers should be no more than 18 in apart under prescriptive deck rules, and many composite and PVC treads need 12 in. Each stringer must be long enough for the full flight — n step diagonals — so buy the next stock length up. Lay out and cut them with the stair stringer calculator.

      Riser and skirt boards

      • Risers: 1x8 boards (7¼ in) cover risers up to 7¼ in; taller risers need 1x10. Each riser is cut to the stair width, so a 36 in stair gets two from each 8 ft board.
      • Skirts: 1x12 boards along the wall, each about the stringer length plus 12 in. Choose 0, 1 or 2 depending on how many sides meet a wall.

      Screws, adhesive and hangers

      Treads are glued and screwed to each stringer — about three screws per stringer — and risers take about two per stringer. One tube of construction adhesive does about five treads. Each stringer hangs from the upper floor framing with a hanger or a ledger; the calculator counts one hanger per stringer. Follow the tread or decking maker’s fastening schedule where it is different.

      What this calculator does not cover

      Stair materials FAQs

      How much lumber do I need to build stairs?

      For a typical 9 ft (108 in) interior stair, 36 in wide with 10½ in treads: four 16 ft 2x12 stringers, 16 hardwood tread blanks 36 in long, nine 8 ft 1x8 riser boards and two 18 ft 1x12 skirts — about 260 board feet including 10% waste.

      What size boards are used for stair treads?

      Hardwood tread blanks (about 1 × 11½ in) cover a 10½ in tread with a 1 in nosing in one piece. 5/4x12 and 2x12 boards are only 11¼ in wide, so they cannot cover a 10½ in run plus a 1¼ in nosing. Deck stairs usually use two 2x6 or 5/4x6 boards per tread with a small gap.

      How many stringers do I need for stairs?

      Divide the stair width by the spacing you want, round up and add one. With 16 in spacing a 36 in stair needs four stringers; composite deck treads often need 12 in spacing, so a 48 in deck stair needs five. Cut stringers should be no more than 18 in apart.

      Do stairs need riser boards?

      Closed stairs inside a house usually have riser boards, which stiffen the treads and stop things falling through. Open risers are common on deck and basement stairs; if you leave them open, the opening must not pass a 4 in sphere under the IRC.

      What are skirt boards on stairs?

      Skirt boards are the finished boards along the wall side of a stair, cut to follow the stair or left straight and scribed around the treads. They hide the joint between the treads and the wall. Each is about the length of the stringer plus a foot for the ends.

      How many screws per stair tread?

      Allow about three screws per tread at each stringer, plus two per riser board at each stringer. A 14-tread stair on four stringers takes about 288 screws. Follow the tread or decking maker’s fastening schedule where it differs.

      How much waste should I allow for stair lumber?

      10% is typical and is what the calculator uses by default. Allow 15% if the stock is likely to have knots, checks or twist, or if you are cutting many short pieces from long boards.

      What materials do I need for deck stairs?

      Pressure-treated 2x12 stringers, two 2x6 or 5/4x6 boards per tread, structural screws and hangers, and usually open risers. A 56 in deck rise 48 in wide with 12 in stringer spacing needs five 10 ft stringers and eight 8 ft 2x6s for the treads.

      Sources

      1. International Residential Code 2021, Chapter 3, Section R311.7 — Stairways (opens in a new tab)International Code Council. Riser, tread, nosing, width and handrail limits for homes; flight height limit at R311.7.3.
      2. Wisconsin Administrative Code, chapter SPS 325 — DecksWisconsin Department of Safety and Professional Services. Prescriptive deck stair rules, including cut stringers at no more than 18 in on centre.
      3. US softwood lumber sizesStandard dressed sizes: 2x12 = 1½ × 11¼ in, 5/4x12 = 1 × 11¼ in, 2x6 = 1½ × 5½ in, 1x8 = ¾ × 7¼ in, 1x10 = ¾ × 9¼ in, 1x12 = ¾ × 11¼ in. Board feet = nominal thickness × nominal width (in) × length (ft) ÷ 12.
      4. Fasteners, adhesive and skirt allowanceCommon shop practice: about 3 screws per tread and 2 per riser at each stringer, one tube of adhesive per 5 treads, 12 in added to skirt boards. No single governing standard.

      Code text is the final word. Editions and local amendments differ — check the edition your building department enforces.

      Stair materials & cost calculatorsAll 6 tools for what a stair takes to build or finish — lumber, concrete, carpet, flooring, paint and cost.View all 6

      Other stair calculator categories