How the stair span calculator works
Stringer span. With board depth d, riser R, tread T, horizontal span L, stair width W and N stringers:
throat = d − R·T ÷ √(R² + T²) · effective depth = throat (cut) or d (solid) · b = 1.5 in
tributary = W ÷ (N − 1) for 3+ stringers, W ÷ 2 for 2 · w = (live + dead) × tributary ÷ 12 plf
M = max(w·L² ÷ 8, 300 × L ÷ 4) · fb = M ÷ S · V = max(w·L ÷ 2, 300) · fv = 1.5·V ÷ (b·d)
Δ = 5·wlive·L⁴ ÷ (384·E′·I·cos²θ), limit sloped length ÷ 360 · utilisation = max(fb ÷ F′b, fv ÷ F′v, Δ ÷ limit)
Allowables: F′b = Fb × CF × Cr with Cr = 1.15 for three or more stringers; wet service multiplies Fv by 0.97 and E by 0.9. Utilisation of 1.00 or less passes. The prescriptive rule is shown beside it: cut stringers up to 6 ft, no more than 18 in apart, with a throat of at least 5 in; solid 2x12 stringers carrying up to 18 in of stair each, up to 13 ft 3 in.
Tread span. One board on flat (width b, 1.5 in thick) carries a 300 lb load at mid-span between stringers s apart: M = 300·s ÷ 4, Δ = 300·s³ ÷ (48·E′·I) with limit s ÷ 288. Maximum spacing = min(4·F′b·S ÷ 300, √(48·E′·I ÷ (288 × 300))).
Wood values used
| Species | Fb (psi) | Fv (psi) | E (psi) |
|---|---|---|---|
| Douglas fir-larch | 900 | 180 | 1,600,000 |
| Hem-fir | 850 | 150 | 1,300,000 |
| Spruce-pine-fir | 875 | 135 | 1,400,000 |
| Southern pine | 2x6 1,000 · 2x8 925 · 2x10 800 · 2x12 750 | 175 | 1,400,000 |
Size factor CF on Fb: 2x6 1.3, 2x8 1.2, 2x10 1.1, 2x12 1.0 (southern pine values are already size-specific). Pressure-treated deck lumber is usually southern pine; use wet service for exterior stairs.
Worked examples
Three cut 2x12 stringers at 6 ft
- Throat11.25 − 7.2 × 10.5 ÷ 12.73 = 5.31 in.
- Load36 in ÷ 2 = 18 in of stair per stringer: 50 psf × 18 ÷ 12 = 75 plf.
- Bendingthe 300 lb point load governs: 300 × 72 ÷ 4 = 5,400 in-lb → 766 psi vs 900 × 1.15 = 1,035 psi.
- Shear and deflection56.5 vs 180 psi; 0.086 in vs 87.30 ÷ 360 = 0.243 in. Utilisation 0.74 — passes, and meets the 6 ft rule.
The same stringers at 12 ft 3 in
The uniform load now governs: 16,882 in-lb gives 2,393 psi against 1,035 psi, and the deflection of 1.49 in is three times the 0.50 in limit — utilisation 3.01. Add a support post, or use solid stringers: two solid southern pine 2x12s over the same span use 71%.
Tread boards
A 2x12 Douglas fir tread at 18 in spacing is stressed to 320 of 900 psi and can span 50.6 in. A wet hem-fir 2x6 at 36 in is over (1,309 psi against 1,105) — 30 in is its limit.
How far can a stair stringer span?
| Horizontal span | Utilisation | Beam check |
|---|---|---|
| 4 ft | 0.49 | passes |
| 5 ft | 0.62 | passes |
| 6 ft | 0.74 | passes |
| 8 ft | 0.99 | passes, just |
| 9 ft | 1.25 | fails |
| 10 ft | 1.64 | fails |
Past 8 ft the stringer fails, and fast: bending grows with the square of the span and deflection with its fourth power, so by 12 ft 3 in deflection is three times the limit. The prescriptive rule stops cut stringers at 6 ft, which keeps a margin for knots, notch cracks and over-cut throats. Lay out the notches with the stair stringer calculator, which also reports the throat.
How far apart should stair stringers be?
| Board | Douglas fir, dry | Southern pine, wet |
|---|---|---|
| 2x6 | 32.2 in | 27.5 in |
| 2x8 | 39.2 in | 33.5 in |
| 2x10 | 45.8 in | 37.0 in |
| 2x12 | 50.6 in | 42.2 in |
Two-by treads are rarely the limit — the stringers usually are. Keep cut stringers within 18 in, which means three under a 36 in stair and four under a 48 in stair. Five-quarter decking and composite treads need closer spacing; follow the maker’s figure.
What this calculator does not cover
- LVL, steel or glulam stringers — use the maker’s span tables or an engineer.
- Connections: ledger, hanger, post and footing design.
- Commercial loads of 100 psf — enter them as the live load for a rough check, but have the stair engineered.
- The lumber list: use the stair materials calculator; for every other stair dimension, the stair code checker.
Stair span FAQs
How far can a stair stringer span?
The prescriptive deck rule limits cut stringers to 6 ft of horizontal span between supports. By calculation, three cut 2x12 Douglas fir stringers on a 36 in stair use 74% of their capacity at 6 ft — but at 12 ft 3 in they are three times over in deflection. Solid 2x12 stringers, with the treads on cleats or in hangers, can span up to 13 ft 3 in for a 36 in stair.
What is the maximum span for a cut stringer?
6 ft horizontally under the prescriptive deck rules, with stringers no more than 18 in apart and at least 5 in of wood left below the notches. A longer run needs a post and beam part way up, more stringers, or solid or engineered stringers.
How far apart should stair stringers be?
No more than 18 in on centre for cut stringers under the prescriptive deck rules, which on a 36 in stair means three stringers. The tread board also sets a limit: a 2x6 tread on flat spans about 31 in in wet spruce-pine-fir and a 2x12 about 50 in in Douglas fir. Composite treads usually need stringers 12 in apart — follow the maker.
Do long stairs need a middle support?
Cut stringers longer than 6 ft horizontally do. Add a post and beam under the stringers at mid-span, or switch to solid stringers or engineered lumber. Without it the stringer bounces and can crack at the notches.
Solid or cut stringers — which spans further?
Solid stringers. A cut stringer only works with the wood below the notches — about 5¼ in of a 2x12 on a 7.2/10.5 stair — while a solid stringer uses the full 11¼ in. A solid board has about 4½ times the bending strength and over 9 times the stiffness of the throat of a cut one.
Can I use 2x10 stringers?
Rarely for cut stringers: a 2x10 notched for a 7 in riser and 11 in tread leaves under 4 in of throat, below the 5 in minimum. A 2x10 works as a solid stringer with treads on cleats, or for very short stairs with a middle support.
How thick should stair treads be?
A nominal 2x (1½ in) board for wood treads on stringers up to about 30 in apart, and more where the boards are narrow. Five-quarter (1 in) decking or composite treads need closer stringers — often 12 in. Check your board and spacing in tread mode.
What load must stairs carry?
40 psf of live load for stairs in homes and a 300 lb concentrated load on any tread (IRC Table R301.5); commercial stairs take 100 psf (IBC Table 1607.1). Add about 10 psf of dead load for the stair itself.
Sources
- International Residential Code 2021, Table R301.5 — Minimum uniformly distributed live loads (opens in a new tab)International Code Council. 40 psf for stairs in dwellings and a 300 lb concentrated load on stair treads.
- International Building Code 2021, Tables 1604.3 and 1607.1 (opens in a new tab)International Code Council. Live-load deflection limit L/360 for floor members (1604.3); stair live loads and the 300 lb concentrated load (1607.1).
- National Design Specification for Wood Construction, Supplement — Tables 4A and 4B (opens in a new tab)American Wood Council. Reference values for No. 2 visually graded lumber, size factor CF, repetitive member factor Cr = 1.15 and wet service factors.
- Wisconsin Administrative Code, chapter SPS 325 — deck constructionWisconsin Department of Safety and Professional Services. Prescriptive rules for cut deck stringers: 5 in minimum throat, 18 in maximum spacing and 6 ft maximum horizontal span. Cited by name; read it on the Wisconsin Legislature's administrative code site.
- Wisconsin Administrative Code, chapter SPS 325, Table 7 — deck tread spansWisconsin Department of Safety and Professional Services. Tread span basis: 300 lb concentrated load, deflection span ÷ 288, No. 2 lumber, wet service; solid 2x12 stringers up to 13 ft 3 in for a 36 in stair.
- Beam formulasStandard beam theory: simply supported beam, M = wL²/8 or PL/4, shear stress 1.5V/(bd), deflection 5wL⁴/(384EI) or PL³/(48EI).
Code text is the final word. Editions and local amendments differ — check the edition your building department enforces.
Related calculators
- Stair stringer calculatorCut layout and throat
- Stair materials calculatorLumber list for the stair
- Stair calculatorRisers, treads and run
- Stair code checkerCheck every dimension
- Concrete steps calculatorA concrete stair instead
Other stair calculator categories